User Guide

12: OEM Integrator Checklist
Open-Q 626 SOM Module Certification OEM Integrator Guide 21
12 OEM Integrator Checklist
The OEM Integrator will integrate the Module in the host systems in accordance with the instruction
specified in this document and the documents referenced herein.
 The OEM Integrator will ensure the Module is integrated in a host system using only antennas
that are of the same type and having equal or less antenna gain as described in this document.
 The OEM Integrator will ensure the antennal placement inside the host system will maintain the
required spacing to the end user for RF Exposure compliance, as specified in this document.
 If other radios are integrated inside the host with the Module, the OEM Integrator will contact a
test lab or TCB to determine if additional FCC compliance evaluation is required to meet FCC
collocation rules.
 The OEM Integrator will ensure end user documentation will contain the specified regulatory
wording and ensure the host system and the Module itself is labeled as specified in this
document.
 The OEM Integrator will ensure that nothing is done that will change the transmit power level of
the module.
 The OEM Integrator will ensure end user documentation will contain clear instructions on how to
access the FCC ID and IC Number of the module should an electronic display (e-labeling) be
used to meet the FCC and IC labeling requirements (Refer to FCC KDB 784748 D02 e labeling
document and IC Notice 2014-DRS1003 for guidance).