User Guide

8: Module May Not Be Installed by End Users
Open-Q 626 SOM Module Certification OEM Integrator Guide 12
8 Module May Not Be Installed by End Users
FCC and IC rules require this Module to be installed in host systems at the factory by the OEM integrator.
Thus, end users of the system may not install the Module. Therefore, the host product user instructions
must not advise the end user on how to access or remove the Module. Additional FCC authorization/filing
is needed to allow end user installation of the radio modules.
If modules are provided to the end users for installation in the host, a two-way authentication protocol is
required to limit the module to operate only with the authorized host system.