Use Instructions

PN 10232 Eagle V1.2 Instructions for Use Rev 1.0 Page 87 of 101
6.3.2. External Communications Hub (ECH) Instructions for Use
Once assembled according to Section 6.3.2.1 The External Communications Hub can be configured in a
wireless or wired fashion to cast the Handheld Fluorescence Camera’s display on to the ECH Display.
The HFC display is cast wirelessly to ECH Display Monitor when the HFC is connected to the ECH PC, using
ECH Router. Follow instructions in Section 6.3.2.2 to set up the ECH Wireless Configuration.
The HFC display is cast directly to ECH Display Monitor when the HFC is connected to the ECH PC, using
HFC USB Cable with ECH Link Cable. Follow instructions in Section 6.3.2.3 to set up the ECH Wired
Configuration.
The ECH support connecting up to two (2) Handheld Fluorescence Cameras at once.
When two (2) Handheld Fluorescence Cameras are connected to ECH:
• the ECH automatically saves data captured on either device, to the other
• data from one HFC can be reviewed on the HFC, and vice versa until the HFC is shutdown
• only 1 HFC can be casted to the ECH
Follow instruction in Step 9 of Section 6.3.2.2 and Step 9 of 6.3.2.3 to connect two (2) Handheld
Fluorescence Cameras to the ECH.
6.3.2.1. ECH Assembly Instructions
Table 41 External Communications Hub Assembly Instructions
1.
Mount ECH Desk onto ECH Cart.
2.
Mount ECH Shelf onto ECH Cart.
3.
Mount ECH Basket onto ECH Cart