Use Instructions

PN 10232 Eagle V1.2 Instructions for Use Rev 1.0 Page 83 of 101
Table 40 Custom Sterile Sleeve Wired Configuration Instructions
5.
Pull to fully extend the
telescopic HFC USB Cable
Cover.
Run the HFC USB Cable through
the telescopic HFC USB Cable
Cover
6.
Pull to align the HFC
USB Cable 90° Type-C
connector with the HFC
USB Hatch, leaving
enough slack to orient
and manoeuvre the
cable easily.
Using provided tape,
secure the opposite
end of the HFC USB
cable to the work
bench, allowing
sufficient slack to orient
and manoeuvre the
HFC during imaging.
7.
Prepare to remove the HFC USB Hatch
with sterile technique by placing
thumb and index finger inside one
small sterile bag provided with the
CSS.
Pinch-grip, twist, and pull the HFC
USB Hatch to remove it.