Use Instructions

PN 10232 Eagle V1.2 Instructions for Use Rev 1.0 Page 82 of 101
6.3.1.2. Custom Sterile Sleeve Wired Configuration
Table 40 Custom Sterile Sleeve Wired Configuration Instructions
1.
Ensure the External Communications Hub (ECH) is set up for ECH Wired Configurations per Section
6.3.2.3.
2.
Pull the CSS out of its
packaging.
Unfold the CSS.
Prepare the CSS, two (2) small
sterile bags, and three (3)
pieces of tape on a flat
surface in the sterile field.
3.
Slide the HFC into the CSS.
Fit the CSS over the HFC optical
head.
Ensure the CSS optical window
snaps onto the optical head.
Position the HFC in the top
right of the CSS such that any
CSS slack material hangs off the
left side of the HFC, while the
CSS Tape is flush with the right
side of the HFC.
4.
Run the HFC USB Cable
through the CSS 6-foot-long
telescopic HFC USB Cable
Cover.