Use Instructions

PN 10232 Eagle V1.2 Instructions for Use Rev 1.0 Page 79 of 101
Table 39 Custom Sterile Sleeve Wireless Configuration Instructions
8.
Link the HFC USB Cable to the ECH Link Cable while observing
sterile technique.
Connect ECH Link Cable to ECH PC USB Port per Section 6.3.2.2
Step 8.
Before proceeding to the next step in this instruction, verify
successful connection between the HFC and ECH per Section
6.3.2.2 Steps 8 through 14.
9.
After verifying successful connection
between the HFC and ECH per Section
6.3.2.2, unplug the HFC USB Cable 90° Type-C
connector from the HFC.
10.
Prepare to cover the HFC
USB Cable 90° Type-C
connector by collecting one
(1) small sterile bag and one
(1) piece of tape.
Cover the HFC USB Cable 90°
Type-C connector with small
sterile bag and seal bottom
opening with tape.