Use Instructions

PN 10232 Eagle V1.2 Instructions for Use Rev 1.0 Page 73 of 101
6.2.2.2.5.1. Ambient Light Warning
When attempting to initiate Fluorescence Imaging when incorrect ambient lighting conditions are
detected, the following warning appears indicating that “ambient light is too bright for
Fluorescence Imaging”
Press to return to Imaging Mode. Take action to correct ambient light
conditions by diminishing sources of light in the imaging environment until the FL icon
located in the top right corner of the Imaging Mode’s user interface is circled in blue.
Pressing on the warning will initiate Fluorescence Imaging with the Ambient
Light Warning icon overlaid in the top right corner of the Imaging Field of View. Any image
or video captured in this condition includes the Ambient Light Warning icon to indicate that
incorrect ambient lighting conditions were used to capture the image or video.
Proceeding with Fluorescence Imaging using incorrect ambient lighting conditions is not
recommended and may result in reduced image quality.