User Manual
4
ENGLISH
Step 5:
Finally, attach the face plate to the bracket by pushing it until it clicks
into place.
The device is now ready for conguration.
Once the $3+; is assembled and mounted in a wall socket, you
will need to congure the device with a computer connected directly
to the unit. To do this, connect one end of an Ethernet cable to the
LAN port on the front panel of the $3+;, and connect the other
end to a LAN port on your computer. Alternatively, the device can be
congured from a computer connected to the PoE switch.
The $3+; can also act as a central connection point for any
device (client) that has an 802.11n/g wireless network interface or
Ethernet port and is within range. Wireless clients must use the
same SSID (wireless network name) and channel as the $3+;
in order to establish a wireless connection. If wireless security is
enabled, the client will need to enter a password.
Step 4:
Place the $3+; and attached bracket over the wall socket and
screw in place.