User's Manual

2. Installation Procedures

This chapter describes the instructions that guide you through the proper installation

of your WUB1900 for the Windows 98SE/ME/2000 /XP/VISTA operating systems.

The complete installation of the WUB1900 consists of the following steps

STEP 1：Insert the provided Driver and Utility CD into your CD drive.

STEP 2：Click Install Driver from the Setup menu.

STEP 3：When the welcome screen appears, click Next.

STEP 4：Click Next to accept the default destination folder for the software or click

Browse to manually select a different destination folder.

STEP 5：For Windows XP, click Continue Anyway at the Windows Logo

Compatibility screen.

STEP 6：Click Finish to complete the installation.

STEP 7：Remove the Driver & Utility CD from your CD drive and then restart your

computer.

Before Installation

In addition to the items shipped with the client adapter, you will also need the following

in order to install the adapter:

Windows XP/Vista CD-ROM. (original Windows installation CD-ROM or diskettes)

Driver Installation for Windows

This section describes the installation procedures of the WUB1900 driver for the

Windows XP/Vista operating systems.

Note: Before you start the installation, you are advised to keep the Windows

CD-ROM in case you might need certain system files.