User's Manual

AP-952X Industrial Wall-mounted Wireless-N/BG AP/Bridge
User's Manual
39
4.3 Expand Your Wireless Network
4.3.1 Create WDS Link
The administrator can create WDS Links for expanding wireless network via this page.
Please click on Wireless -> Virtual AP Setup -> VAP0 Setup and follow the below setting.
32. Service : By default, it's “Disable”. To “Enable” to activate WDS.
33. Enable : Click Enable checkbox to create WDS link.
34. WDS Peer's MAC Address : Enter the MAC address of WDS peer.
35. Description : Description of WDS link.
36. WMM : Select Enable, the packets with QoS WMM has higher priority.
If WDS activate, the Security Type only support “
WEP
” on VAP0
Change these settings as described here and click Save button to save your changes. Click Reboot button to
activate your changes.