User's Manual

AP-952X Industrial Wall-mounted Wireless-N/BG AP/Bridge
User's Manual
30
23. Hidden SSID : Select this option to enable the SSID to broadcast in your network. When configuring the
network, it is suggested to enable this function but disable it when the configuration is complete. With this
enabled, someone could easily obtain the SSID information with the site survey software and get
unauthorized access to a private network. With this disabled, network security is enhanced and can prevent
the SSID from begin seen on networked.
24. Client Isolation : Select Enable, all clients will be isolated from each other, that means all clients can not
reach to other clients.
25. WMM : Select Enable, the packets with QoS WMM will has higher priority.
26. IAPP Support : Inter Access-Point Protocol is designed for the enforcement of unique association
throughout a ESS(Extended Service Set) and for secure exchange of station's security context between
current access point (AP) and new AP during hand off period.
IAPP only used on WPA-PSK and WPA2-PSK security type. Only one of VAPs can be enabled
27. Maximum Clients : Enter maximum number of clients to a desired number. For example, while the number
of client is set to 32, only 32 clients are allowed to connect with this VAP.
28. Service Domain : Select the desired Service Domain from the drop-down list.
29. Security Type : Select the desired security type from the drop-down list; the options are WEP, WPA-PSK,
WPA2-PSK, WPA-Enterprise, WPA2-Enterprise and WEP 802.1X.
1. Disable : Data are unencrypted during transmission when this option is selected.
2. WEP : WEP, Wired Equivalent Privacy, is a data encryption mechanism based on a 64-bit,
128-bit or 152-bit shared key. Select WEP as the security type from the drop down list as