User's Manual
AP-952X Industrial Wall-mounted Wireless-N/BG AP/Bridge
User's Manual
64
5.3 Manage the System
5.3.1 Configure System Time
System time can be configured via this page where manual setting and NTP server configuration are both
supported. Please click on System -> Time Server and follow the below setting.
Local Time : Display the current time of the system.
Setup Time Use NTP : Enable Network Time Protocol, NTP, to synchronize the system time with NTP server.
Default NTP Server : Select the NTP Server from the drop-down list.
Time Zone : Please set a time zone from where the accurate time can be supplied, (GMT+08:00) Taipei
for example.
Daylight saving time : Enable Daylight saving time from where the accurate time needed.
If Time server setting selected in “Setup Time User NTP”, please verify system's DNS and Default
Gateway setting first.
Change these settings as described here and click Save button to save your changes. Click Reboot button to
activate your changes