User's Manual

AP-952X Industrial Wall-mounted Wireless-N/BG AP/Bridge
User's Manual
42
4.4.2 Configure Management
The administrator can later obtain the geographical location of the system via the information configured here. The
administrator also can change system password and configure system login methods. Please click System ->
Management and follow the below settings.
 System Information
 System Name : Enter a desired name or use the default provided.
 Description : Denote further information of the system.
 Location : Enter related geographical location information of the system; administrator/manager will be
able to locate the system easily.
 Root Password : Log in as a root user and is allowed to change its own. Root user also can change admin
user's and operator user's password. Click Save button to activate the new password.
 New Password : Please input the new password of administrator.
 Check New Password : Please input again the new password of administrator.
 Admin Login Methods : The admin manager can enable or disable system login methods, it also can change
services port. Click Save button to activate the admin login methods.
 Enable HTTP : Select Enable HTTP to activate HTTP Service
 HTTP Port : Please input 1 ~ 65535 value to set HTTP Port; default value is 80
 Enable Telnet : Select Enable HTTP to activate HTTP Service
 Telnet Port : Please input 1 ~ 65535 value to set HTTP Port; default value is 23