User's Manual

AP-952X Industrial Wall-mounted Wireless-N/BG AP/Bridge
User's Manual
56
5.2 Expand Your Wireless Network
The system manager can configure related wireless settings, General Settings, Advanced Settings, WDS Setup
and WDS Status.
5.2.1 Configure Wireless General Setup
The administrator can change the data transmission, channel and output power settings for the system. Please click
on Wireless -> General Setup and follow the below setting.
37. MAC address : The MAC address of the Wireless interface is displayed here.
38. Band Mode : Select an appropriate wireless band; bands available are 801.11b, 802.11b/g, 802.11b/g/n and
802.11n.
39. Transmit Rate Control : Select the desired rate from the drop-down list; the options are auto or ranging
from 1Mbps to 54Mbps for 802.11b/g modes, or 1Mbps to 11Mbps for 802.11b mode.
40. Country : Select the desired country code from the drop-down list; the options are US, ETSI and Japan.
41. Channel : The channel range will be changed by selecting different country code. The channel range from 1
to 11 for US country code, or 1 to 13 for ETSI country code, or 1 to 14 for Japan(Channel 14 only for
802.11b Rate).
Click “Auto Scan”, the channel will change to next channel. Click “AP List” button, the system will show current all
AP list.