User's Manual

AP-952X Industrial Wall-mounted Wireless-N/BG AP/Bridge
User's Manual
53
Chapter 5. WDS Mode Configuration
This section provides detailed explanation for users to configure in the WDS mode with help of illustrations. In the
WDS mode, functions listed in the table below are also available from the Web-based GUI interface.
Option System Wireless Utilities Status
Operating Mode General Setup Profiles Settings System Overview
LAN Advanced Setup Firmware Upgrade Extra Info
Management WDS Setup Network Utility Event Log
Time Server WDS Status Reboot
Functions
SNMP
Table 5-1: WDS Mode Functions
5.1 Connect AP-952X to the Wired Local Network
5.1.1 Network Requirement
You could expand your Ethernet network via WDS link. In this mode, the AP-952X connects directly to a wired
LAN, and wirelessly bridges to a remote access point via a WDS link as shown in Figure 5-1. In the mode, it can’t
associate with any wireless clients.
Figure 5-1 Point to Point network Configuration