User's Manual

User Manual
WCB1200H5PX Wireless High Power 5.8Ghz CPE
212
Chapter 8. Router AP Mode Configuration
When Router AP mode is chosen, the system can be configured as a Router with Access Point and WDS function. This
section provides detailed explanation for users to configure in the Router AP mode with help of illustrations. In the Router
AP mode, functions listed in the table below are also available from the Web-based GUI interface.
OPTION System Wireless Advance Utilities Status
Operating Mode General Setup DMZ Profiles Settings System Overview
WAN Advanced Setup IP Filter Firmware Upgrade Station Statistics
LAN Virtual AP Setup MAC Filter Network Utility Extra Info
DDNS WDS Setup Virtual Server Reboot QoS Plot
Management Parental Control Event Log
Time Server QoS
UPNP
Functions
SNMP
Table 8-1: Router AP Mode Functions
8.1 External Network Connection
8.1.1 Network Requirement
It can be used as an Router AP with WDS function. In this mode, WCB1200H5PX is a gateway enabled with NAT and
DHCP Server functions. The wireless clients connected to WCB1200H5PX are in different subnet from those connected
to Internet.
Figure 8-1 Router AP mode network configuration