User's Manual

User Manual
WCB1200H5PX Wireless High Power 5.8Ghz CPE
195
 Admin Login Methods : Only root user can enable or disable system login methods and change services port.
 Enable HTTP : Check to select HTTP Service.
 HTTP Port : The default is 80 and the range is between 1 ~ 65535.
 Enable HTTPS : Check to select HTTPS Service
 HTTPS Port : The default is 443 and the range is between 1 ~ 65535.
If you already have an SSL Certificate, please click “UploadKey” button to select the file and upload it.
 Enable Telnet : Check to select Telnet Service
 Telnet Port : The default is 23 and the range is between 1 ~ 65535.
 Enable SSH : Check to select SSH Service
 SSH Port : Please The default is 22 and the range is between 1 ~ 65535.
Click “GenerateKey” button to generate RSA private key. The “host key footprint” gray blank will display content
of RSA key.
 Ping Watchdog : The ping watchdog sets the WCB1200H5PX Device to continuously ping a user defined IP
address (it can be the internet gateway for example). If it is unable to ping under the user defined constraints, the
WCB1200H5PX device will automatically reboot. This option creates a kind of "fail-proof" mechanism.
Ping Watchdog is dedicated for continuous monitoring of the particular connection to remote host using the Ping tool.
The Ping works by sending ICMP “echo request” packets to the target host and listening for ICMP “echo response”
replies. If the defined number of replies is not received, the tool reboots the device.
 Enable Ping Watchdog : control will enable Ping Watchdog Tool.
 IP Address To Ping : specify an IP address of the target host which will be monitored by Ping Watchdog Tool.
 Ping Interval : specify time interval (in seconds) between the ICMP “echo requests” are sent by the Ping
Watchdog Tool. Default is 300 seconds.
 Startup Delay : specify initial time delay (in seconds) until first ICMP “echo requests” are sent by the Ping
Watchdog Tool. The value of Startup Delay should be at least 60 seconds as the network interface and wireless
connection initialization takes considerable amount of time if the device is rebooted. Default is 300 seconds.
 Failure Count To Reboot : specify the number of ICMP “echo response” replies. If the specified number of
ICMP “echo response” packets is not received continuously, the Ping Watchdog Tool will reboot the device.