User's Manual

User Manual
WCB1200H5PX Wireless High Power 5.8Ghz CPE
188
WPA-PSK (or WPA2-PSK) : WPA (or WPA2) Algorithms, allows the system accessing the network by using the
WPA-PSK protected access.
Cipher Suite : Select the desired cipher suite from the drop-down list; the options are AES and TKIP
Pre-shared Key : Enter the information for pre-shared key; the key can be either entered as a 256-bit
secret in 64 HEX digits format, or 8 to 63 ASCII characters.
Profile List : The user can manage the created profiles for home, work or public areas. Below depict an example for
Profile List
Click “”Edit” an exist profile on the Profile List. The field of System Configuration and Security Policy will display
profile's content. Edit profile's content and then click “Save” button to save the profile.
Click “Delete” to remove profile.
Click and Select a profile from list, then click the “Connect” button to connecting to the wireless network with the
profile setting. After clicking “Connect” button, the system should be jump to Remote AP Page, you can verify
connecting status on Remote AP Page.
When you click “Save” button on this page, the system will connect to specify AP and jump to
Remote AP Page
If tuen on IEEE802.11H and WCB1200H5PX connect AP with DFS channel 52-140,
WCB1200H5PX Will have 60 sec to do channel available check, and will not send beacon and
can not be connect.
Change these settings as described here and click Save button to save your changes. Click Reboot button to activate
your changes