User's Manual

User Manual
WCB1200H5PX Wireless High Power 5.8Ghz CPE
187
7.2.4 Create Wireless Profile
The administrator can configure station profiles via this page.
Please click on Wireless -> Wireless Profile and follow the below setting.
MAC Address : The MAC address of the Wireless Station is displayed here.
Profile Name : Set different profiles for quick connection uses.
ESSID : Assign Service Set ID for the wireless system.
Lock to AP MAC : This allows the station to always maintain connection to a particular AP with a specific MAC
address. This is useful as sometimes there can be few identically named SSID's (AP's) with different MAC addresses.
With AP lock on, the station will lock to MAC address and not roam between several Access Points with the same
ESSID.
Channel/Frequency : Select the desired channel range.
Security Type : Select the desired security type from the drop-down list; the options are “NONE” “OPEN”,
SHARED”, “WPA-PSKand “WPA2-PSK”.
OPEN / SHARED : OPEN and SHARED require the user to set a WEP key to exchange data.
Key Index : key index is used to designate the WEP key during data transmission. 4 different WEP keys
can be entered at the same time, but only one is chosen.
WEP Key # : Enter HEX or ASCII format WEP key value; the system supports up to 4 sets of WEP keys.
Key Length Hex ASCII
64-bit 10 characters 5 characters
128-bit 26 characters 13 characters