User's Manual

User Manual
WCB1200H5PX Wireless High Power 5.8Ghz CPE
117
5.6.3 Extra Info
Users could pull out information such as Route table, ARP table, MAC table, Bridge table or STP available in the drop-
down list from system. The “Refresh” button is used to retrieve latest table information.
 Netstat Information : Select “NetStatus Information” on the drop-down list, the connection track list should
show-up, the list can be updated using the Refresh button.
NetStatus will show all connection track on the system, the information include Protocol, Live Time, Status ,
Source/Destination IP address and Port.
 Route table information : Select “Route table information” on the drop-down list to display route table.
WCB1200H5PX could be used as a L2 or L3 device. It doesn’t support dynamic routing protocols such as RIP or
OSPF. Static routes to specific hosts, networks or default gateway are set up automatically according to the IP
configuration of system's interfaces. When used as a L2 device, it could switch packets and, as L3 device, it’s
capable of being a gateway to route packets inward and outward.
 ARP table Information : Select “ARP Table Information” on the drop-down list to display ARP table.
ARP associates each IP address to a unique hardware address (MAC) of a device. It is important to have a unique IP
address as final destination to switch packets to.