User's Manual

User Manual
WCB1200H5PX Wireless High Power 5.8Ghz CPE
179
 MCS : This parameter represents transmission rate. By default (Auto) the fastest possible transmission rate will be
selected. You have the option of selecting the speed if necessary. (Refer to Appendix C. MCS Data Rate)
 MPDU Enable : Check Enable button to activate this function, and Disable to deactivate.
 A-MPDU : A-MPDU (Aggregated Mac Protocol Data Unit) allows the transmissions of multiple Ethernet frames to a
single location as burst of up to 64kbytes This is performed on the hardware itself. Select “Manual” to set “MPDU
Density”
 MPDU Density : Minimum separation of MPDUs in an A-MPDU.
0 1 2 3 4 5 6 7
No Restriction ¼ µs ½ µs 1 µs 2 µs 4 µs 8 µs 16 µs
 A-MSDU : Aggregated Mac Service Data Unit, A-MSDU. Select Enable to allow aggregation for multiple MSDUs in
one MPDU. Default is disabled.
Click Save button to save your changes. Click Reboot button to activate your changes. The items in this page are for
AP's RF general settings and will be applied to Repeater AP