User's Manual

User Manual
WCB1200H5PX Wireless High Power 5.8Ghz CPE
177
 DHCP : Check Enable button to activate this function or Disable to deactivate this service.
 Start IP / End IP: Specify the range of IP addresses to be used by the DHCP server when assigning IP address
to clients. The default range IP address is 192.168.2.10 to 192.168.2.70, the netmask is 255.255.255.0
 DNS1 IP : Enter IP address of the first DNS server; this field is required.
 DNS2 IP : Enter IP address of the second DNS server; this is optional.
 WINS IP : Enter IP address of the Windows Internet Name Service (WINS) server; this is optional.
 Domain : Enter the domain name for this network.
 Lease Time : The IP addresses given out by the DHCP server will only be valid for the duration specified by
the lease time. Increasing the time ensure client operation without interruptions, but could introduce potential
conflicts. Lowering the lease time will avoid potential address conflicts, but might cause more interruptions to the
client while it will acquire new IP addresses from the DHCP server. Default is 86400 seconds
Click Save button to save your changes. Click Reboot button to activate your changes