User's Manual
User Manual
WCB1200H5PX Wireless High Power 5.8Ghz CPE
170
6.7.3 Remote AP
SSID, MAC address, antenna 0/1 received signal strength and channel bandwidth for associated AP are available.
ESSID : Shows the current ESSID, which must be the same on the wireless client and AP in order for communication
to be established.
MAC Address : Display MAC address of associated AP.
Signal Strength ANT0/ANT1 : Shows the wireless signal strength of the connection between system and an access
point.
BandWidth : Shows the current channel bandwidth used for communication. It should be “20” or “40”
If display “No Connection AP!” , you need check Wireless configuration. Things to verify are Channel and
Security type. Also, adjust antenna angle and Tx Power.