User's Manual
User Manual
WCB1200H5PX Wireless High Power 5.8Ghz CPE
162
DROP Precedence Class 1 Class 2 Class 3 Class 4
Low Drop
AF11 AF21 AF31 AF41
Medium Drop
AF12 AF22 AF32 AF42
High Drop
AF13 AF23 AF33 AF43
Protocol : Select Any or specify protocol from drop-down list. When you select ICMP or Layer 7 Application ,
the Source/ Destination Port can not used.
Local Port : Specify local port(LAN port) range required for this rule
Destination Port : Specify destination port range required for this rule
Action : After configuring rule, a policy rule ensures that a traffic flow gets the requested treatment in the network.
Remark DSCP : Specify a new DSCP class, if you want to replace or remark the DSCP
Bandwidth : Click “Enable” to activate function, and click “Disable” to deactivate function
Upload / Download : Specify the bandwidth in kilobit per second (Kbps). Enter a number between 8 to 8192,
default upload is 128 Kbps, download is 1024 Kbps.
Click “Add” button to add QoS rule to List. There are 10 rules maximum allowed in this QoS List. All rules can be removed
or edited on the List. Click Reboot button to activate your changes.
When you create rules on the QoS List, the previous rules have higher priority. . Below depict the examples for explaining
priority of QoS setup.
Example 1 : On this setting, the FTP has 1024 Kbps upload and 8196 Kbps download on 192.168.2.10. The
remaining IP address and other remaining protocol of IP address 192.168.2.10 only can use total bandwidth 512
Kbps bandwidth. Because rule 1's priority is higher than rule 2
Rule Source IP Destination IP DSCP Protocol Remark DSCP Bandwidth (Up/Down)
1 192.168.2.10 ANY FTP NO 1024/8196
2 ANY ANY NO 512/512
Example 2 : On this setting, the FTP has 512 Kbps upload and 512 Kbps download on 192.168.2.10 Because
rule 1's priority is higher than rule 2
Rule Source IP Destination IP DSCP Protocol Remark DSCP Bandwidth (Up/Down)
1 ANY ANY NO 512/512
2 192.168.2.10 ANY FTP NO 1024/8196