User's Manual

User Manual
WCB1200H5PX Wireless High Power 5.8Ghz CPE
115
5.6.2 Station Statistics
Link information, Transmit and Receive Statistics for the connection with AP, Below depicts an example for Station
Statistics.
 Link Status :
 Status : Shows the current link status. It should be “Connected” or “Disconnected”.
 ESSID : Shows the current SSID, which must be the same on the wireless client and AP in order for
communication to be established.
 BSSID : Shows the associated BSSID, which can be used to identify the wireless access point.
 Extra Info : Shows the current link status of extra information. It should be “Link is Up” or “Link is Down”,
 Channel : Shows current channel and central channel, its corresponding frequency.
 Link Speed(Mbps) : The data transfer speed adopted by this network. (measured in Mbits per second)
 Link Quality : Shows the link quality of the system with an access point.
 Signal Strength ANT0/ANT1 : Shows the wireless signal strength of the connection between system and an
access point.
 HT Status :
 Channel BandWidth : Shows the current channel bandwidth used for communication. It should be “20” or “40”
 Guard Interval : Shows the current GI used for communication. It should be “short” or “long”.
 MCS : Shows the current GI used for communication. It should be between 0 to 15 or 32.
 Transmit Statistics
 Frames Transmitted Successfully: The number of successfully transmitted frames.
 Frames Transmitted Successfully Without Retry: The number of successfully transmitted frames without any
retry.
 Frames Transmitted Successfully After Retry(s): The number of successfully transmitted frames with one or
more retries.