User's Manual

User Manual
WCB1200H5PX Wireless High Power 5.8Ghz CPE
122
6.1.2 Configure WAN Setup
There are three connection types for the WAN port : Static IP, Dynamic IP, PPPoE and PPTP,
Please click on System -> WAN and follow the below setting.
In CPE+AP mode, the WAN Port is the Wireless Station interface.
 Mode : By default, it’s “Static IP”. Check “Static IP”, “Dynamic IP”, “PPPoE” or “PPTP”to set up system WAN IP.
 Static IP : Users can manually setup the WAN IP address with a static IP provided by WISP.
 IP Address : The IP address of the WAN port; default IP address is 192.168.1.254
 IP Netmask : The Subnet mask of the WAN port; default Netmask is 255.255.255.0
 IP Gateway : The default gateway of the WAN port; default Gateway is 192.168.1.1
 Dynamic IP : Please consult with WISP for correct wireless settings to associate with WISP AP before a
dynamic IP, along with related IP settings including DNS can be available from DHCP server. If IP Address is not
assigned, please double check with your wireless settings and ensure successful association. Also, you may
go to “WAN Information” in the Overview page to click Release button to release IP address and click Renew
button to renew
IP address
again.
 Hostname : The Hostname of the WAN port
 PPPoE : To
create wireless
PPPoE WAN
connection to a
PPPoE server
in network.