User's Manual

User Manual
WCB1200H5PX Wireless High Power 5.8Ghz CPE
88
5.2.4 Create Wireless Profile
The administrator can configure station profiles via this page.
Please click on Wireless -> Wireless Profile and follow the below setting.
MAC Address : The MAC address of the Wireless Station is displayed here.
Profile Name : Set different profiles for quick connection uses.
ESSID : Assign Service Set ID for the wireless system.
Security Type : Select an appropriate security type for association, the Security Type can be selected in “NONE”,
OPEN”, “SHARED”, “WPA-PSK”, or “WPA2-PSK” from drop-down list; the type needs to be the same as that
associated access point.
OPEN / SHARED : OPEN and SHARED require the user to set a WEP key to exchange data.
Key Index : key index is used to designate the WEP key during data transmission. 4 different WEP keys
can be entered at the same time, but only one is chosen.
WEP Key # : Enter HEX or ASCII format WEP key value; the system supports up to 4 sets of WEP keys.
Key Length Hex ASCII
64-bit 10 characters 5 characters
128-bit 26 characters 13 characters
WPA-PSK (or WPA2-PSK) : WPA (or WPA2) Algorithms, allows the system accessing the network by using the
WPA-PSK protected access.