User's Manual

User Manual
WCB1200H5PX Wireless High Power 5.8Ghz CPE
80
User Name : Enter User Name for PPPoE connection
Password : Enter Password for PPPoE connection
Reconnect Mode :
Always onA connection to Internet is always maintained.
On DemandA connection to Internet is made as needed.
When Time Server is enabled at the “On Demand” mode, the “Reconnect Mode” will turn out “Always on”.
Manual – Click the “Connect” button on “WAN Information” in the Overview page to connect to the
Internet.
Idle Time : Time to last before disconnecting PPPoE session when it is idle. Enter preferred Idle Time in
minutes. Default is “0”, indicates disabled. When Idle time is disabled, the “Reconnect Mode” will turn out
Always on
MTU : By default, it’s 1492 bytes. MTU stands for Maximum Transmission Unit. Consult with WISP for a
correct MTU setting.
PPTP : The Point-to-Point Tunneling Protocol (PPTP) mode enables the implementation of secure multi-protocol Virtual
Private Networks (VPNs)
through public networks.
IP Address : The IP address of the WAN port
IP Netmask : The Subnet mask of the WAN port
PPTP Server IP Address : The IP address of the PPTP server
User Name : Enter User Name for PPTP connection
Password : Enter Password for PPTP connection
Reconnect Mode :
Always onA connection to Internet is always maintained.
On DemandA connection to Internet is made as needed.