Manualshelf

User's Manual

ManualsBrandsLanReady Technologies ManualsElectronics802.11a/n AP (Master)
71727374757677787980
User Manual
WCB1200H5PX Wireless High Power 5.8Ghz CPE
73
4.4.2 WDS List
Peers MAC Address, antenna 0/1 received signal strength, phy mode and channel bandwidth for each WDS are available.
MAC Address : Display MAC address of WDS peer.
Signal Strength ANT0/ANT1 : Indicate the signal strength of the respective WDS links.
Phy Mode : Indicate the phy mode of the respective WDS linked.
BandWidth : Indicate the channel bandwidth of the respective WDS linked.
MCS : Indicate the MCS of the respective WDS linked.
SGI : Indicate the SGI (Short Guard Interval) of the respective WDS linked. “1” indicate the Short Guard Interval, “0”
indicate the Long Guard Interval.
If display “no signal” Signal Strength ANT0/ANT1, you need check WDS configuration. Things to verify are MAC
Address, Channel and Security type. Also, adjust antenna angle and Tx Power.