User's Manual

User Manual
WCB1200H5PX Wireless High Power 5.8Ghz CPE
65
4.3.3 Configure SNMP Setup
SNMP is an application-layer protocol that provides a message format for communication between SNMP managers and
agents. By enabling SNMP function, the administrator can obtain the system information remotely.
Please click on System -> SNMP Setup and follow the below setting.
SNMP v2c Enable : Check to enable SNMP v2c.
ro community : Set a community string to authorize read-only access.
rw community : Set a community string to authorize read/write access.
SNMP v3 Enable: Check to enable SNMP v3.
SNMPv3 supports the highest level SNMP security.
SNMP ro user : Set a community string to authorize read-only access.
SNMP ro password : Set a password to authorize read-only access.
SNMP rw user : Set a community string to authorize read/write access.
SNMP rw password : Set a password to authorize read/write access.