User's Manual

Regulatory install Information
The device connect two omni-antennas (12dBi) that has been tested and evaluated again by a
certified laboratory for the verification of FCC, CE and NCC compliances.
This device requires professional installation. Installers please refer to the caution statements
under each regulatory section to make sure the final installation meet the regulation within you
territory. If you are in the North America, please read the caution statements in FCC section. If you
are in the Europe countries, please read the caution statements under CE. And if you are in the
Taiwan, please read the Chinese statements under NCC. In addition, it is important for all to read the
following Safety Information first.
Safety Information
• This product was qualified under test conditions that included the use of the power supplying
equipment. To ensure regulatory and safety compliance, use only the provided power
supplying equipment and install them properly
• To prevent electrical shock, this device may require a grounding conductor in the line cord.
Connect the unit to a grounding type ac wall outlet using the power supplying equipment
supplied with the unit.
• To avoid the risk of electric shock and for a safety outdoor installation, you may need other
items, such as surge arrestors.
• To avoid the risk of electric shock from lightening, do not install or use this product during an
electrical storm.
• Operate and install this product as described in this manual. This device must be installed and
used in strict accordance with the manufacturer's instructions.
• Do not open the device casing. Do not perform any servicing other than that contained in the
installation and troubleshooting instructions. Refer all servicing to qualified service personnel.