User's Manual

User Manual

WCB1200H5PX Wireless High Power 5.8Ghz CPE

4.1.2 Configure LAN IP

Here are the instructions for how to setup the local IP Address and Netmask.

Please click on System -> LAN and follow the below setting.

 Mode : Check either “Static IP” or “Dynamic IP” button as desired to set up the system IP of LAN port .

 Static IP : The administrator can manually setup the LAN IP address when static IP is available/ preferred.

 IP Address : The IP address of the LAN port; default IP address is 192.168.2.254

 IP Netmask : The Subnet mask of the LAN port; default Netmask is 255.255.255.0

 IP Gateway : The default gateway of the LAN port; default Gateway is 192.168.2.1

 Dynamic IP : This configuration type is applicable when the WCB1200H5PX is connected to a network with the

presence of a DHCP server; all related IP information will be provided by the DHCP server automatically.

 Hostname : The Hostname of the LAN port

 DNS : Check either “No Default DNS Server” or “Specify DNS Server IP” button as desired to set up the system DNS.

 Primary : The IP address of the primary DNS server.

 Secondary : The IP address of the secondary DNS server.

Click Save button to save your changes. Click Reboot button to activate your changes