User's Manual
User Manual
WCB1200H5PX Wireless High Power 5.8Ghz CPE
50
Chapter 4. WDS Mode Configuration
Please refer to illustrations of the section 1.3 for possible applications in the WDS mode. This section provides detailed
explanation for users to configure in the WDS mode with help of illustrations. In the WDS mode, functions listed in the
table below are also available from the Web-based GUI interface.
Option System Wireless Utilities Status
Operating Mode General Setup Profiles Settings System Overview
LAN Advanced Setup Firmware Upgrade WDS Status
Management WDS Setup Network Utility Extra Info
Time Server Reboot Event Log
Functions
SNMP
Table 4-1: WDS Mode Functions
4.1 External Network Connection
4.1.1 Network Requirement
You could expand your Ethernet network via WDS link. In this mode, the WCB1200H5PX connects directly to a wired
LAN, and wirelessly bridges to a remote access point via a WDS link as shown in Figure 4-1. In the mode, it can’t
associate with any wireless clients.
Figure 4-1 Point to Point network Configuration