User's Manual
User Manual
WCB1200H5PX Wireless High Power 5.8Ghz CPE
32
3.3 Wireless Network Expansion
The administrator could create WDS Links to expand wireless network. When WDS is enabled, access point functions as
a wireless bridge and is able to communicate with other access points via WDS links. A WDS link is bidirectional and
both side must support WDS. Access points know each other by MAC Address. In other words, each access
point needs to include MAC address of its peer. Ensure all access points are configured with the same channel
and own same security type settings.
Please click on Wireless -> WDS Setup and follow the below setting.
Security Type : Option is “Disable”, “WEP”, “TKIP”or “AES” from drop-down list. Needs the same type to build WDS
links. Security type takes effect when WDS is enabled.
WEP Key : Enter 5 / 13 ASCII or 10 / 26 HEX format WEP key.
TKIP Key : Enter 8 to 63 ASCII or 64 HEX format TKIP key.
AES Key : Enter 8 to 63 ASCII or 64 HEX format AES key.
WDS MAC List
Enable : Click Enable to create WDS link.
WDS Peer's MAC Address : Enter the MAC address of WDS peer.
Description : Description of WDS link.
The WDS link needs to be set at same Channel and with same Security Type.
Click Save button to save your changes. Click Reboot button to activate your changes