User's Manual
User Manual
WCB1200H5PX Wireless High Power 5.8Ghz CPE
26
3.2.3 Create Virtual AP (VAP)
The WCB1200H5PX support broadcasting multiple SSIDs, allowing the creation of Virtual Access Points, partitioning a
single physical access point into 7 logical access points, each of which can have a different set of security, VLAN Tag(ID)
and network settings. Figure 3-2 shows multiple SSIDs with different security type and VLAN settings.
Figure 3-2 Multiple SSIDs with different Security Type and VLAN Tag
3.2.3.1 Virtual AP Overview
The administrator can view all of the Virtual AP's settings via this page.
Please click on Wireless -> Virtual AP Setup and the Virtual AP Overview Page appears.
VAP : Indicate the system's Virtual AP.
ESSID : Indicate the ESSID of the respective Virtual AP
MAC Address : The MAC address of the VAP Interface is displayed here. When you enable AP and reboot system,
the MAC address will display here.
Status : Indicate the Status of the respective Virtual AP. The Primary AP always on.
Security Type : Indicate an used security type of the respective Virtual AP.
MAC Filter : Indicate an used MAC filter of the respective Virtual AP.
Edit : Click Edit button to configure Virtual AP's settings, including security type and MAC Filter.