User's Manual

User Manual

WCB1200H5PX Wireless High Power 5.8Ghz CPE

 WMM : By default, it's “Disable”. To Enable is to use WMM and the WMM parameters should appears.

When you enable WMM, the “Tx Burst” will be Disabled automatically by system.

 WMM Parameters of Access Point : This affects traffic flowing from the access point to the client station

Queue

Data Transmitted

AP to Clients

Priority Description

AC_BK Background. Low

High throughput. Bulk data that requires maximum throughput and is not time-

sensitive is sent to this queue (FTP data, for example).

AC_BE Best Effort Medium Medium throughput and delay. Most traditional IP data is sent to this queue

AC_VI Video High Minimum delay. Time-sensitive video data is automatically sent to this queue

AC_VO Voice High

Time-sensitive data like VoIP and streaming media are automatically sent to this

queue

Configuring QoS options consists of setting parameters on existing queues for different types of wireless traffic.

You can configure different minimum and maximum wait times for the transmission of packets in each queue

based on the requirements of the media being sent. Queues automatically provide minimum transmission delay

for Voice, Video, multimedia, and mission critical applications, and rely on best-effort parameters for traditional IP

data.

As an Example, time-sensitive Voice & Video, and multimedia are given effectively higher priority for transmission

(lower wait times for channel access), while other applications and traditional IP data which are less time-

sensitive but often more data-intensive are expected to tolerate longer wait times.