User's Manual

User Manual
WCB1200H5PX Wireless High Power 5.8Ghz CPE
15
Chapter 3. AP Mode Configuration
When AP mode is chosen, the system can be configured as an Access Point. This section provides detailed explanation
for users to configure in the AP mode with help of illustrations. In the AP mode, functions listed in the table below are also
available from the Web-based GUI interface.
Option System Wireless Utilities Status
Operating Mode General Setup Profiles Settings System Overview
LAN Advanced Setup Firmware Upgrade Clients
Management Virtual AP Network Utility WDS Status
Time Server WDS Setup Reboot Extra Info
Functions
SNMP Event Log
Table 3-1: AP Mode Functions
3.1 External Network Connection
3.1.1 Network Requirement
Normally, WCB1200H5PX connects to a wired LAN and provides a wireless connection point to associate with wireless
client as shown in Figure 3-1. Then, Wireless clients could access to LAN or Internet by associating themselves with
WCB1200H5PX set in AP mode.
Figure 3-1 Access Point on a Wired LAN Configuration