User's Manual

User Manual
WCB1200H5PX Wireless High Power 5.8Ghz CPE
14
2.2 Web Management Interface Instructions
WCB1200H5PX supports web-based configuration. Upon the completion of hardware installation, WCB1200H5PX can be
configured through a PC/NB by using its web browser such as Internet Explorer version 6.0.
 Default IP Address : 192.168.2.254
 Default IP Netmask : 255.255.255.0
 Default User Name and Password :
The default user name and password for both root manager account and admin manager account are as follows :
Mode Router AP CPE AP WDS UR + CB CPE + AP
Management Account
Root
Account
Root
Account
Admin
Account
Root
Account
Root
Account
Root
Account
Root
Account
Admin
Account
User Name
root root admin root root root root admin
Password
default default admin default default default default admin
Step
 IP Segment Set-up for Administrator's PC/NB
Set the IP segment of the administrator's computer to be in the same range as WCB1200H5PX for accessing the
system. Do not duplicate the IP Address used here with IP Address of WCB1200H5PX or any other device within the
network
Example of Segment :
The valid range is 1 ~ 254 and 192.168.2.254 shall be avoided because it is already assigned to WCB1200H5PX .
192.168.2.10 is used in the example below.
 IP Address : 192.168.2.10
 IP Netmask : 255.255.255.0
 Launch Web Browser
Launch web browser to access the web management interface of system by entering the default IP Address,
http://192.168.2.254
, in the URL field, and then press Enter.
 System Login
The system manager Login Page then appears.
Enter “root” as User name and “default” as Password, and then click OK to login to the system; the root manager
account is used as an example here.
 Login Success
System Overview page will appear after successful login.