User's Manual

User Manual

WCB1200H5PX Wireless High Power 5.8Ghz CPE

 DHCP Server in Router AP , CPE/CPE + AP and Client Bridge + Universal Repeater Mode

 802.3 Bridging

 Masquerading (NAT)

 Proxy DNS

 Dynamic DNS

 NTP Client

 Virtual DMZ

 Virtual Server (IP/ Port Forwarding)

 Support MAC Filter

 Support IP Filter

 Bandwidth traffic Shaping

 Wireless Feature

 Transmission power control : 1~100 %

 Channel selection : Manual or Auto

 No of associated clients per AP : 32

 Setting for max no associated clients : Yes

 No. of ESSID (Virtual AP ) : 7

 No. of Max. WDS setting : 4

 Preamble setting : Short/ Long

 Setting for 802.11a/n mix or 802.11a only

 Setting for transmission speed

 Dynamic Wireless re-transmission

 IEEE802.11f IAPP (Inter Access Point Protocol), hand over users to another AP

 IEEE 802.11i Preauth (PMKSA Cache )

 IEEE 802.11h - TPC(Transmission Power Control) and DFS(Dynamic Frequency Select)

 IEEE 802.11d -Multi country roaming

 Wireless Site Survey

 Channel Bandwidth setting : 20MHz or 20/40MHz

 HT Tx/Rx Stream selection : 1 or 2

 A-MSDU and A-MPDU support

 Maximal MPDU density for TX aggregation setting

 Short Slot support

 Slot time and ACK Timeout support

 RTS Threshold and Fragment Threshold support