User's Manual

User Manual

WCB1200H5PX Wireless High Power 5.8Ghz CPE

1.4 Product Benefit

 IEEE 802.11n Draft 2.0 Compliance in 2Tx / 2Rx Design

 Support IEEE 802.11n and 802.11a

 Operates in the 5GHz ISM Band

 Enables Bandwidth of up to 300Mbps(Tx), 300Mbps(Rx) link rate

 Topology : Point to Point ; Point to Multi Point

 Router AP Mode

 Access Point Mode : Pure Access Point Function and Access Point /Bridge(WDS) Function

 WDS Mode

 CPE Mode (Router Client )

 Client Bridge + Universal Repeater

 CPE + AP Mode

 Security with 802.1X, WPA, and WPA2

 Support QoS(Quality of Service) & WMM

 Integrated Power over Ethernet (PoE)

 Multiple Virtual AP & Capability of Client Isolation

 Business-class WLAN Security and Client Authentications

 Provide Advanced Wireless Setting

 Support Web Management and SNMP MIB II

 Over Load Current Protection

 Client Isolation Through Layer 2 VLAN Technology

 Two administrator accounts for manager authorities

 QoS for bandwidth management and traffic prioritization

WCB1200H5PX outdoor high power WiFi-A/N Bridge is the point of connection to Wireless Outdoor Network for service

provider deploying last mile services to business or residential broadband subscribers.. Network administrators can create

multiple subscriber service tier using per-subscriber rate limiting features, and manage centrally. WCB1200H5PX outdoor

bridge utilizes a 200mW output Tx Power to connect to the WiFi mesh or WDS infrastructure and provides the subscriber

with an Ethernet connection for a local access.

WCB1200H5PX outdoor high power Bridge can be used for nine different purposes in six different modes, the Router AP

mode , AP mode, the WDS mode, the CPE mode, Client Bridge + Universal Repeater mode and CPE + AP mode,

respectively with built-in remote management features.