User's Manual

User Manual
WCB1200H5PX Wireless High Power 5.8Ghz CPE
104
5.4.3 Parental Control Setup
Parental Control allows you to block or allow specific kinds of Internet usage and traffic, such as Internet access,
designated services, and websites.
Please
click on
Advance
->
Parental
Control
and
follow the
below setting.
Rules : control can be managed by a rule. Use the settings on this screen to establish an access policy.
Comment : Enter a descriptive name for this rule for identifying purposes.
MAC Address : Enter MAC address in valid MAC address format(xx:xx:xx:xx:xx:xx) and click Add” button to
add in the MAC group of each rule. Click Remove” button can remove MAC address in the group of each rule.
There are 10 MAC address maximum allowed in each rule.
Local / Destination IP : Specify local(LAN)/ destination IP addresses range required for this rule. If you specify
local IP addresses range from 192.168.1.1 to 192.168.2.254. The matches a range of local IP addresses
include every single IP address from the first to the last, so the example above includes everything from
192.168.1.1 to 192.168.2.254.
Protocol : Select Any or specify protocol(TCP, UDP, ICMP, URL Blocking and Application) from drop-down
list. When you select ICMP or Layer 7 Application , the Local(LAN)/ Destination Port can not used.