User's Manual

User Manual
WCB1000H5PX/WCB1010H5PX IEEE802.11bg High Power BS/Bridge/CPE
83
 DHCP : Check Enable button to activate this function or Disable to deactivate this service.
 Start IP / End IP: Specify the range of IP addresses to be used by the DHCP server when assigning IP
address to clients.
 DNS1 IP : Enter IP address of the first DNS server; this field is required.
 DNS2 IP : Enter IP address of the second DNS server; this is optional.
 WINS IP : Enter IP address of the Windows Internet Name Service (WINS) server; this is optional.
 Domain : Enter the domain name for this network.
 Spanning Tree Protocol
The spanning tree network protocol provides a loop free topology for any bridged LAN. The Spanning Tree
Protocol, which is also referred to as STP, is defined in the IEEE Standard 802.1d.
Change these settings as described here and click Save button to save your changes. Click Reboot button to
activate your changes