User's Manual

User Manual
WCB1000H5PX/WCB1010H5PX IEEE802.11bg High Power BS/Bridge/CPE
78
6.1.2 WAN Setup
Here is instruction for how to setup the WAN. Please click on System -> WAN and follow the below setting.



















 Mode : Check “Static IP”, “Dynamic IP” and “PPPoE” button as desired to set up the system IP of WAN port.
 Static IP : The administrator can manually setup the WAN IP address when static IP is available/ preferred.
 IP Address : The IP address of the WAN port; default IP address is 192.168.1.254
 IP Netmask : The Subnet mask of the WAN port; default Netmask is 255.255.255.0
 IP Gateway : The default gateway of the WAN port; default Gateway is 192.168.1.1