User's Manual

User Manual
WCB1000H5PX/WCB1010H5PX IEEE802.11bg High Power BS/Bridge/CPE
66
5.2.3 BRIDGE Setup
The administrator can create BRIDGE Links via this page. Please click on Wireless -> BRIDGE Setup and follow
the below setting.












 WMM : Select Enable, the packets with QoS WMM will has higher priority.
 Security Type : Configure an appropriate security type for the BRIDGE link, either Disabled or WEP; the type
needs to be the same as that configured on BRIDGE peer.
 Key Length : Select the desire option are 64 bits, 128 bits or 152 bits from drop-down list.
 Key : Provide the WEP key value. The key value should be HEX digits format.
 Enable : Click Enable button to create BRIDGE link.
 BRIDGE Peer's MAC Address : Enter the MAC address of BRIDGE peer.
 VLAN ID : Virtual LAN, the system supports tagged VLAN. To enable VLAN function; valid values are from 1 to
4094; 0 is disabled.
 Description : Description of BRIDGE link.
Change these settings as described here and click Save button to save your changes. Click Reboot button to
activate your changes
Bridge Setup
Bridge Setup
Bridge