User's Manual

User Manual

WCB1000H5PX/WCB1010H5PX IEEE802.11bg High Power BS/Bridge/CPE

4.3 Utilities

The administrator can maintain the system via this page: Profile Setting, System Upgrade, Ping Utility, and

Reboot.

4.3.1 Profile Setting

Current settings on the system can be backed up, or previous backed up settings can be restored as well as

resetting the system back to factory default can be performed via this page. Please click on Utilities -> Profile

Setting and follow the below setting.

 Save Settings to PC : Click Save button to save the current system settings to a local disk, i.e. the HDD of a

local computer or Compact Disc.

 Load Settings from PC : Click Browse button to search for a previously saved backup file, and then click

Upload button to upload the settings; the system will then be configured to the same settings as specified by

the backup file.

 Restore To Factory Default : Click Restore button to load the factory default settings of WCB1000H5PX/

WCB1010H5PX, and then Success Message page appears. Click Reboot button to set default configuration.