User's Manual

User Manual
WCB1000H5PX/WCB1010H5PX IEEE802.11bg High Power BS/Bridge/CPE
37
4.2.3.1 Virtual BASE STATION General Configuration
For each Virtual BASE STATION, administrators can configure general settings and wireless security type. Click
Wireless -> Virtual BASE STATION -> EDIT, and then Virtual BASE STATION Configuration page appears.
 ESSID : Extended Service Set ID indicates the SSID which the clients used to connect to the VBS. ESSID will
determine the service type of a client which is assigned to the specified VBS.
 Hidden SSID : Select this option to enable the SSID to broadcast in your network. When configuring the
network, it is suggested to enable this function but disable it when the configuration is complete. With this
enabled, someone could easily obtain the SSID information with the site survey software and get unauthorized
access to a private network. With this disabled, network security is enhanced and can prevent the SSID from
begin seen on networked.
 Client Isolation : Select Enable, all clients will be isolated each other, that means all clients can not reach to
other clients.
 WMM : Select Enable, the packets with QoS WMM will has higher priority.
 IBSP Support : Inter Access-Point Protocol is designed for the enforcement of unique association throughout
a ESS(Extended Service Set) and for secure exchange of station's security context between current base
station (BS) and new BS during hand off period.
Note : IBSP supported only for WPA-PSK/WPA2-PSK, WPA-Enterprise/WPA2-Enterprise and 802.1X
security type.
 Maximum Clients : Enter maximum number of clients to a desired number. For example, while the number
of client is set to 5, only 5 clients are allowed to connect with this VBSF.
 VLAN ID : Virtual LAN, the system supports tagged VLAN. To enable VLAN function; valid values are from 1 to
4094.
VBS 0
BS00