User's Manual

User Manual
WCB1000H5PX/WCB1010H5PX IEEE802.11bg High Power BS/Bridge/CPE
34
4.2.2 Advanced Setup
The administrator can change the Slot Time, ACK/CTS Timeout, RTS threshold and fragmentation threshold
settings for the system. Please click on Wireless -> Advanced Setup and follow the below setting.














 Slot Time : Enter the desired slot time for the BASE STATION.
 ACK Timeout : The time interval for waiting the “ ACKnowledgment frame”. If the ACK is not received within
that timeout period then the packet will be re-transmitted. Higher ACK Timeout will decrease the packet lost,
but the throughput will be growing worse.
 CTS Timeout : Enter the desired CTS timeout for the BASE STATION.
Note : Slot Time and ACK/CTS Timeout settings for long distance links. It is important to change the
value to find the optimal setting. A value too low will give very low throughput, A high value may
slowdown the link.
 RSSI Threshold : RSSI Threshold can be used to control the level of noise received by the device.
 Beacon Interval : Enter a value between 10 and 5000 msec. The default value is 100 milliseconds. The
entered time means how often the beacon signal transmission between the base station and the wireless
network.
Virtual BS mode