User's Manual

User Manual
WCB1000H5PX/WCB1010H5PX IEEE802.11bg High Power BS/Bridge/CPE
30
4.1.5 SNMP Setup
SNMP is an application-layer protocol that provides a message of format for communication between SNMP
managers and agents. By enabling SNMP function, the administrator can obtain the system information remotely.
Please click on System -> SNMP Setup and follow the below setting.







 v2c : Check v2c button to activate SNMP v2c agent or unchecked to deactivate this function.
 ro community : Enter the community strings that allows read-only access to the system's SNMP
information.
 rw community : Enter the community strings that allows read/write access to the system's SNMP
information.
 v3 : Check v3 button to activate SNMP v3 agent or unchecked to deactivate this function. SNMPv3 supports
the highest available levels of security for SNMP communication.
 SNMP ro user : Enter the community strings that allows read-only access to the system's SNMP
information.
 SNMP ro password : Enter the password that allows read-only access to the system's SNMP information.
 SNMP rw user : Enter the community strings that allows read/write access to the system's SNMP