User's Manual

User Manual
WCB1000H5PX/WCB1010H5PX IEEE802.11bg High Power BS/Bridge/CPE
23
Chapter 4. BASE STATION (Point to Point) Mode
Configuration
When BASE STATION mode is activated, the system can be configured as an Base station. This section provides
information in configuring the BASE STATION mode with graphical illustrations. WCB1000H5PX/WCB1010H5PX
provides functions as stated below where they can be configured via a user-friendly web based interface.
Option System Wireless Utilities Status
Operating Mode General Settings Profiles Settings System Overview
LAN Advanced Settings Firmware Upgrade Associate Client Status
Management
Virtual BASE
STATION
Ping Utility Event Log
Time Server Reboot
Functions
SNMP
Table 4-1: BASE STATION Mode Functions
Figure 4-1: BASE STATION Mode Main Page
BS mode