User's Manual

User Manual

WCB1000H5PX/WCB1010H5PX IEEE802.11bg High Power BS/Bridge/CPE

3.1.3 Hardware Installation Steps

Please follow the steps mentioned below to install the hardware of WCB1000H5PX/ WCB1010H5PX :

Front Panel Rear Panel

1. Connect N-type reverse antenna to the N-type reverse connector on the rear panel.

2. Connect PSE to the PoE connector on the front panel.

3. Connect an Ethernet cable to the PSE and the other end to a computer.

4. Power on the PSE in order to supply power to WCB1000H5PX

Front Panel Rear Panel

1. Connect PSE to the PoE connector on the front panel.

2. Connect an Ethernet cable to the PSE and the other end to a computer.

3. Power on the PSE in order to supply power to WCB1010H5PX